Bulkhead Tabbing--the aft side

I tabbed in the back side of the upper bulkhead today with a double layer of stitched matt tape. I am debating whether to use some fillet and roving on this side also. I am not sure if it is necessary given that pressure would be against the other side.

I also tabbed in the top of the bulkhead, on the forward side against the cockpit sole using some form wood to hold it in place.

While is like to finish the exhaust system, friend Ron is nearly done with the port side settee and ill probably tab that in next. 

Tomorrow will be a grinding day.  I'll be cutting out parts of the aft head and aft upper bunks, and grinding away all the old tabbing.  Plus, I need to finish grinding the forward locker, and forward floors. 

Port side looking forward from lazarette.

Starboard side looking forward from lazarette.