Ron and I test fitted the upper bunks. Ron marked up the old pieces for a pattern. Now that is done, I was able to start installing the third level of the bulkhead. This is in two pieces already cut a few days ago.
Looking forward from the lazarette to the starboard side. aft bulkhead. I used two cleats to hold this in place while I tabbed in the other side
Here is a view aft of the area that I subsequently tabbed in. I tabbed the four sides and the top of the shelf.
Note there is a bit of a gap on the hull edge so I laid most of that tabbing on the wood and will add another layer of stitched mat, mat and roving, in that order, on that edge. I will need more roving to do that.
No comments:
Post a Comment