More Tabbing

I am running out of tabbing jobs. And I am running out of materials. Do I buy a full roll, or do I order a length. I feel like ordering a full roll and some more cloth and non-epoxy resin for the aft cabin. 

Today I tabbed in one section under the starboard side shelf--the top is already done. I used a wide board to apply pressure.  Next I tabbed in an area that did not bond well on a previous attempt. This was where the two aft bulkhead panels join each other. Then I tabbed in the front side of the short fuel tank bulkhead all the way across. Some places had no tabbing and others did--with a good bond. Finally, I tabbed in the top of the aft head bulkhead where it meets the deck. It was a small piece so I used extra material, mat and roving to replace one small piece of broken roving.

 

Next I finished the inside priming. It has been a long day and I want to make it one of my most productive.