Cabin Sole Repair Nearly Complete

Here is an update on what the sole looks like.  I cleaned up and cut a board to cover the water tank. I will probably need to put a layer of fiberglass on top of that to make the floor more even.

I'll be moving on to a much easier repair aft at a seam between two floor panels.  This will be much easier.  I'll just grind off the top layer back about 5 inches on either side, scoop out the rotted core, glass the bottom layers together, recore, fill and glass the top together again.  The only issue will be getting in and out of the boat with the ladder removed.